Aluminum, Stamped 90 degree Elbow with 1" Internal Radius and Seam for 1-1/4" and 1-1/2" Sch. 40 Pipe

Item Number

290 and 362

Grouped product items

90 Degree Elbow for 1-1/4" Pipe, Stamped Aluminum, Seamed Stamped aluminum elbow with unwelded seam for 1-1/4" Pipe (OD 1.66" dia.) Wall thickness is .13" Item Number : 290 PRICE : $11.20 QTY :
90 Degree Elbow for 1-1/2" Pipe, Stamped Aluminum, Seamed Stamped aluminum elbow with unwelded seam for 1-1/2" Pipe (OD 1.90" dia.) Wall thickness is .145" Item Number : 362 PRICE : $8.50 QTY :

These 90° aluminum elbows have a 1" internal radius that will allow for a nice corner curve.

These elbows are stamped from a 3003 alloy sheet and have the unwelded seam.

For a painted railing are these are okay but aluminum, a lot of times, is anodized so the elbows are not as esthetically pleasing with the seam.

When the seam is welded and then anodized the elbow will show discoloration at the weld.

The 3003 alloy will not bronze anodize. Clear anodize is okay but not as good as the same alloy as the pipe which is alloy 6063.

Available for 1-1/4" and 1-1/2" pipe.

Alloy: 3003 Seamed Elbows, 6063 Pipe Elbows

More Information
SKU	290 and 362
Brands	Wagner
Pipe Size	1.66" dia. Tube (1-1/4" Sch. 40 Pipe), 1.9" dia. Tube (1-1/2" Sch. 40 Pipe)
Split Shoe	No

CAD Drawing for item 290 (Size: 235 KB)

Dimensional Drawing for item 290 (Size: 36.9 KB)

CAD Drawing for item 362 (Size: 302 KB)

Dimensional Drawing for item 362 (Size: 37.1 KB)

90 Degree Elbow for 1-1/4" Pipe, Stamped Aluminum, Seamed