Albatros ABS-100P For single gates up to 13ft (4m) or double gates up to 26ft (8m) Note: Gate width is limited to 3 times the height.
ABS-100P System Configuration Formulas For Opening Size "A" and Gate Frame Profile Thickness "T"
B: Hinge gap
B (in) = 3-3/8" - T/2
L: Gate leaf width
L (in) = (A - 2" - B) ÷ 2
G: Hinge to post connector tube length
G (in) = L - 9-7/16" + B
E: Gate width in open position
E (in) = (2 x T) + B + 2-1/8"
F: Net opening size
F (in) = A - E
NOTE: The parameters in BOLD in the formulas above are inches
Piccolo Hinge Gaps by Profile Size
FRAME SIZE
HINGE GAP
ADJUSTABILITY
2"
2-1/4"
+/- 5/16"
3"
1-3/4"
+/- 5/16"
4"
1-1/4"
+/- 5/16"
ABS-100P Gate Frame Size Requirements
OPENING A (in)
LEAF WEIGHT P/2 MAX (lbs)
GATE FRAME MIN TUBE SIZE (in)
60" (5')
220
3" x 2" 11 Ga
78" (6'6")
220
3" x 2" 11 Ga
96" (8')
220
3" x 2" 11 Ga
120" (10')
220
3" x 2" 11 Ga
144" (12')
220
4" x 2" 11 Ga
156" (13')
220
6" x 2" 11 Ga
NOTE: For leaf weights (P/2) over 220 lbs., contact AIDI for technical support at 908.757.2323
As indicated in the table above, we recommend the use of tubing specified to make your gate structurally sound/rigid to avoid bending during opening and closing cycles. It is also advisable to limit the overall gate weight as much as possible.
