Galvanized 2-7/8" wide small track for heavy duty industrial overhead door systems. Use with 375-P20 and 376-P20 Trolleys.
Sold in 9'10" foot lengths.

One of our customer service representatives will contact you in regards to shipping your item.

In order to ship UPS, track must be cut to no more than 7'9" feet. There is a $10.00 per cut charge.

Galvanized 2-7/8" wide small track for heavy duty industrial overhead door systems. Use with 375-P20 and 376-P20 Trolleys.
Sold in 19'8" foot lengths.

One of our customer service representatives will contact you in regards to shipping your item.

In order to ship UPS, track must be cut to no more than 7'9" feet. There is a $10.00 per cut charge.

This galvanized track connection guide is use to join two pieces of track together.

Use this support with the small track, item 399.

This support measures:
3-3/8" (86mm) wide
3" (75mm) high
3" (75mm) long

This adjustable wall support can be used with Comunello Sliding Door and Folding Door tracks.

This wall support is 7-1/4" long and comes galvanized.

Recommended bracket spacing for is 27-1/2" apart.

This adjustable wall support can be used with Comunello Sliding Door and Folding Door tracks.

This wall support is 13" long and comes galvanized.

Recommended bracket spacing for is 27-1/2" apart.

This galvanized adjustable track support is used to sliding door track at the wall support.

Use this support with the small track, item 399.

This support measures:
3-3/8" (86mm) wide
3" (75mm) high
4" (100mm) long

Galvanized trolley with 4 wheels for heavy duty overhead industrial sliding door systems.
Weight capacity is 880 pounds per trolley.

Galvanized trolley with 4 nylon wheels for heavy duty overhead industrial sliding door systems.
Weight capacity is 880 pounds per trolley.

This upper pin is to be used with sliding door trolleys 375-P20, 376-P20 and 375G along with the 34-G Mounting Plate.

This pin is galvanized. It is 6" (150mm) long x M20.

The 34-G mounting plate will work with Comunello sliding door trolleys with a 20mm bolt. The mounting plate will allow you to screw the trolley into the top of the gate frame.

This large lever is used to operate the tubular drop bolt, item 695G.

- Right operating
- Galvanized

This large lever is used to operate the tubular drop bolt, item 695G.

- Left operating
- Galvanized

This galvanized, tubular drop bolt is to be used with item 694-MC, the large lever.

Size 30mm x 10mm x 9'10" long.

Galvanized drop bolt guide. Use this guide with the Comunello 30mmx 10mm tubular drop bolt.

This black nylon pull handle comes complete with guides to help hold the 30mm x 10mm tubular drop bolt in place on the door.

The handle itself measures 9-1/2" high. The handle assembly measures 11-7/16" high from top of bracket to bottom of bracket.

This galvanized ground strike plate will receive the 30mm x 10mm drop bolt and keep the door secure.

This galvanized gate stop, with rubber bumper, is to be used within the 398 and 399 sliding door track.

This bottom guide roller will keep the sliding door plum and vertical.

1-3/16" (30mm) dia. brass roller
Ground mounted
Galvanized mounting plate

This bottom guide roller will keep the sliding door steady and straight.

2-3/8" dia. nylon wheel
Ground mounted
Galvanized mounting plate

Galvanized runaway gate stop for use with rolling/sliding gates.
- to be screwed on
- 4-3/4" high

Gate Stop with triple function for rolling/sliding or swing gates.
- to be screwed on
-  5-3/16" high

Galvanized damped runaway gate stop for use with rolling/sliding and swinging gates.
- to be screwed on
- 4-3/16" high

Galvanized adjustable runaway gate stop for use with rolling/sliding and swinging gates. This gate stop has a slot to accommodate up to a 2-1/2" gate frame.
- to be screwed on
- 5-1/8" high